Mini-Z Racing Italia » Upgrade & Optional

MC3WLS Differential Kit for 1:28 Mini-Z Scale

Davidino — Thu, 02 Dec 2021 11:24:42 +0000

This is the latest in differential technology for the 1/28 scale.
Unlike conventional adjustable ball bearing differentials, this differential utilizes a thrust bearing to control axial loads.
This makes the distribution of power to each wheel more precise, providing a smoother throttle feel and a more consistent driving experience.

Features:
- High Quality Thrust bearing made in Japan
- ABEC 5 radial bearings
- Silicon Nitride Ceramic Grade 5 balls
- no more e-clip required! this differential uses a special threaded nut. This allows you to keep the same settings you had before cleaning/taking apart the differential unlike traditional ball diffs which will require losing your setting
- comes with a set of precision injected molded Delrin 64 pitch gears and pinions
- 52, 53, 54 Tooth Spurs
- 9, 10, 11, 12 Tooth Pinions
- titanium coated D-cut washers (compatible with PN Racing differentials)
- 304 stainless steel precision cut shaft
- T7075 anodized aluminum parts

For any wide width 2WD 1/28 chassis
Compatible with Kyosho MR-03, GL Racing GLR/GT, Atomic MRZ

Designed in Canada, Made in China
PRODUCT COMES UNASSEMBLED

Frequently Asked Questions (FAQ)
Q1. Why is this differential design special over other differentials on the market?
A1. This design features two types of ball bearings: a thrust bearing controls axial
loads while the spur gear and outer diff half bearings control centrifugal loads.
This combination allows more precise transfer of power which means more
throttle control providing a more consistent driving experience.

Q2. Your diff seems expensive, why?
A2. The differential is priced very competitively compared to other diffs on the
market considering it already comes with many upgraded components which are
normally extra for other companies. We include ceramic balls, titanium coated
diff washers, a 3 pack of spurs and 5 pinions along with a high quality Japanese
made thrust bearing.

Q3. Why did you put a stainless stain shaft in the kit? Isn’t that heavy?
A3. The shaft is meant to be strong so we chose stainless steel. Although you can
use the diff for a stock class, it was meant for mod class. We will offer a
lightweight version of the diff in the near future.

Q4. Will it fit narrow bodies?
A4. No, it is meant for wide bodies only. We’ve done this since we are solely
focused on the best performance possible and that means racers will use wide
bodies as they provide the most cornering grip.

Q5. Will it fit into my LM motor mount?
A5. No, it is meant to fit into a standard MM (mid mount) motor mount.

Q6. Does the spur gear use a bearing?
A6. Yes, it comes with a bearing.

Q7. Does the diff use 3mm wheel bearings on each side?
A7. No, it uses a 3mm bearing on the gear side and a 2mm bearing on the nondrive
side. This way it will be compatible with those racers already using our quick
change wheel nut.

Q8. Should I use grease in the ball diff?
A8. No, we recommend to run it dry. Running grease attracts a lot of debris which
will negatively affect your performance. Even though it is run dry, you still need to
clean the diff, just not as frequently. Please continue to clean and oil your
bearings using quality bearing oil not grease.

Q9. Why did we choose red for our gears?
A9. It looks cool. Seriously though we choose red as it’s easier to see rubber from
the track since it will show up more clearly to make sure cleaning was done
thoroughly. Red is also one of our company logo colours.

Q10. What kind of grease should I use for the thrust bearing?
A10. Typical bearing oil not grease. In particular, we have found Atomic thrust
bearing grease will gum up and prevent the thrust bearing from working properly
so don’t use that one for sure.

Q11. How tight should the diff right wheel nut be?
A11. Hand tighten is not enough. You need to use pliers but make sure not to
overtighten. Holding just the shaft just to tighten may not be enough, we suggest
to install the Diff left hub first to get some leverage to tighten the right wheel nut.

Q12. What assembly tips do you have?
A12. Check out our instruction manual as it’s full of tips (Page 9)

Q13. What size rims can I run with this diff?
A13. The diff is 2mm wider on each side when compared to a standard Mini-Z
differential. This means using a +1mm wide offset rim is equal to a +3mm offset
wide rim on a standard Mini-Z differential. So do the math to figure out what you
can use for the body you are running.

Q14. Why is there no e-clip?
A14. We’ve eliminated the necessity of using a e-clip to hold the diff together. We
have replaced it with what we call the diff right wheel nut. This innovation allows
you to keep the diff setting you had before when taking the diff apart for
cleaning. The diff right wheel nut also assists in not overtightening the actual
(outside) wheel nut that holds the wheel unto the diff hub. Most racers
traditionally overtighten this nut creating binding.

MC3WLS Manual Differential

Available on shop Minizracing.it
Shop Link MC3WLS

Marka Racing Alu 7075-T6 Lower Suspension Arm 2mm for MDF14 (Black)

Davidino — Tue, 22 Mar 2016 10:27:53 +0000

Alu 7075-T6 Lower Suspension Arm for MDF14 is designed, developed and made in Italy.
The lower arm has 2mm thick of Avional Alu 7075-T6 and is annodized in black color.
The lower arm has 2.5mm more than the original carbon part and the total front get larger of 5mm.
The lower arms flex less than the original carbon arms and the car gets more stability. It is easy to drive and more speed in the corner.
It can be used with the carbon or alu chassis in low, medium and high grip conditions.

MRK-6070-K

Producer: Marka Racing

Marka Racing Alu Rear Pod Lower Plate 2.0mm for MDF14 (Black)

Davidino — Tue, 22 Mar 2016 10:27:06 +0000

Aluminum 7075-T6 MDF14 pod lower plate is designed, developed and made in Italy.
The pod lower plate has 2mm thick of Avional Alu 7075-T6 and is annodized in black color.
Countersunk holes for smooth, flat bottom.
We recomend to use it together with the Alu chassis 2mm (MRK-6064-K)

MRK-6066-K

Producer: Marka Racing

Marka Racing Alu 7075-T6 Chassis 2.0mm for MDF14 (Black)

Davidino — Tue, 22 Mar 2016 10:26:22 +0000

Aluminum 7075-T6 MDF14 chassis is designed, developed and made in Italy.
The chassis has 2mm thick of Avional Alu 7075-T6 and is annodized in black color.
The alu chassis increases stability in medium and high grip conditions.
The alu chassis give you more traction and makes the car easier to drive.
Countersunk holes for smooth, flat bottom.
We recomend to use it together with the pod lower plate 2mm (MRK-6066-K)

MRK-6064-K

Producer: Marka Racing

Marka Racing – Aluminium 7075-T6 Front Body Post Plate for Formula (Black)

Davidino — Mon, 07 Mar 2016 14:26:11 +0000

The front plate from Marka Racing brand is made in Aluminum 7075-T6 for Formula.
This upgrade allows to use/change different front wings without changing the distances of the holes on the body front part.
On the plate it is mounted a plastic column (supplied in the car kit) and it is fixed on the wing.
With this upgrade you are no longer forced, when you replace the wing, to change the location of the holes on the front of the body.
The plate is worked on CNC machine and anodized later in black color.
The package includes a plate in aluminum (Ergal 7075-T6).
There are two versions, one for the formula (MRK-6052) MD Racing and another for (MRK-6051) Xray X1, Yokomo and other.
This products are Made in Italy!

MRK-6051

MRK-6052

Producer: Marka Racing

Marka Racing – Aluminium 7075-T6 Side Damper Tube (Compensator) for Formula MD Racing

Davidino — Mon, 07 Mar 2016 11:04:11 +0000

This is the replacement tube Marka Racing for damper of MD Formula Racing car.

It is produced in Aluminium (Ergal 7075-T6) and using this upgrade you will have greater smoothness, precision in movement and upper strength.
The item include one tube and a steel hex screw SB.
Made in Italy.

Code: MRK-6045

Producer: Marka Racing

Marka Racing RK800 AAA Battery Rechargeable NI-MH (4 Pcs)

Davidino — Mon, 22 Feb 2016 11:11:28 +0000

New RK800 batteries produced by Marka Racing.

This battery have a good punch and are designed for maximum performance in the race.
This battery provide constant voltage output over time, with no drop-off after the first few minutes, ensuring consistent and lasting performance.

Ideal for powerful motors, endurance and stock race where consistency is key.
Recommend charge at 1.0 Amp for the best performance between power and run time.

Code: MRK-NIMH800

Specification
Capacity: 800mah
Size: AAA
4pcs

Productor: Marka Racing
Distributor: Minizracing

Team Marka Racing!

Volante V5 Tought 1/10 TC Rubber Tire Pre-glued (4pcs)

Davidino — Fri, 04 Sep 2015 11:00:09 +0000

The latest establishment from Volante’s tyre development brings you the premium Volante V5 tyre.
Developed by World Champions, the Version 5 combines maximum speed with maximum longevity.

Tested on a variety of tracks around the world, the V5 provides superior traction to any other tyre, whilst limiting the ‘drop off’ experienced by many other tires on the market.
The tyre and wheel combination is perfectly true, meaning no vibration when driving. Minimum excess moulding material makes it unnecessary to ‘sand’ or ‘cut’ the line from now, making it less time consuming and risky preparing new tires.
Volante V5’s will be able to provide you with premium traction and longevity in any condition.

Source: Volante
Italian Distributor: Minizracing & Marka Racing

MD Racing – MDF14 New Aluminium Uprights

Davidino — Tue, 25 Aug 2015 15:54:58 +0000

Aluminium Uprights just manufactured with 7075 T6 grade aluminium and finished with a MD RAcing gold colour annodized.

MD Racing – MDF14 New servo supports

Davidino — Tue, 25 Aug 2015 15:54:25 +0000

Black or Gold color, both finished with a perfect anodized and lasered with MD Racing logo.

MD Racing – MDF14 Center Shock

Davidino — Tue, 25 Aug 2015 15:53:26 +0000

In the images you will see the Spare Parts numbers in order to purchase them, you will be able to get it in a whole center shock pack or in other case get spare parts of plastic, silicones and center springs!

MD Racing – MDF14 Telaio & Smorzatore

Davidino — Fri, 10 Jul 2015 08:21:54 +0000

Il nuovo telaio in carbonio del Formula MDF14 e lo smorzatore.
Lo smorzatore è anodizzato con un rivestimento ad alta resistenza e sarà disponibile in colore oro e nero.

Smorzatore

Telaio

Sorgente: MD Racing
Distributore Italiano: Minizracing

Come opzionare una Kyosho Mini-Z MR-03

Davidino — Wed, 10 Jun 2015 08:37:27 +0000

Di seguito troverete una lista di optional per la Vostra Kyosho Mini-Z MR-03.
Abbiamo scelto i migliori optional sul mercato in questo momento per rendere la Kyosho Mini-Z MR-03 il più performante possibile.

Team Minizracing

Clear Body – 1/10 Rally Leggends – Abarth 500

Davidino — Wed, 13 May 2015 09:50:09 +0000

Carrozzeria trasparente Abarth 500 completa di stickers ed accessori, prodotta dalla casa costruttrice Italiana Italtrading.

Codice: EZQR10520
Shop: Minizracing

Clear Body – 1/10 Rally Leggends – Lancia Delta S4

Davidino — Wed, 13 May 2015 09:45:44 +0000

Carrozzeria trasparente Lancia Delta S4 completa di stickers ed accessori, prodotta dalla casa costruttrice Italiana Italtrading.

Codice: EZRL2435
Shop: Minizracing

Marka Racing Produrrà i Pneumatici Miniz per RCP

Davidino — Mon, 02 Feb 2015 10:03:38 +0000

Marka Racing il nuovo brand Italiano creato dal patron di Minizracing produrrà i pneumatici Miniz per le piste in RCP!
Marka Racing il nuovo brand Italiano ha deciso di inserire nel suo catalogo oltre ad upgrade/articoli per la scala Touring 1:10, quelli per Mini-Z.

Dopo svariati mesi sono erminati i test con grande successo e si è deciso di passare alla produzione.
Le gomme per Mini-Z di Marka Racing rendono la Mini-Z più stabile, facilitano la guidabilità ed abbiamo notato un miglioramento sul giro di circa un decimo.

Inoltre i lotti di produzione delle gomme saranno sempre gli stessi.
Abbiamo cercato di portare un ottimo prodotto sul mercato.
Le gomme Marka Racing verranno prodotte con shore differenti sia per l’anteriore che per il posteriore.

A fine Febbraio saranno pronte!
Stay tuned!
www.markaracing.com
www.minizracing.it

Marka Racing Li-Po Racing Battery 7200mAh 100C 7.4V 2S

Davidino — Fri, 23 Jan 2015 16:44:51 +0000

The Marka Racing batteries have a high level voltage under load, with a low internal resistance.
Marka cells are placed in a very hard case very of black color that protects them from shocks.
Marka battery can be connected using gold connectors of 4mm.
These batteries have passed the necessary certifications for air transport.

Le batterie Marka Racing hanno un alto livello di tensione sotto carico, con una bassa resistenza interna.
Le celle Marka sono alloggiate in un case (hard-case) molto rigido e robusto di colore nero che le protegge da eventuali urti.
La batteria Marka può essere collegata tramite connettori dorati da 4mm.
Le batterie hanno passato le certificazioni necessarie per il trasporto aereo.

Specification
Number of cells: 2 (2S+2P)
Voltage: 7,4V
Capacity: 7200mAh
C-rate: 100C
Plug: 4mm gold plug
Type: Rectangular
Weight: 310g

Code: MRK-LI7200

Marka Racing Li-Po Racing Battery 6000mAh 100C 7.4V 2S

Davidino — Fri, 23 Jan 2015 16:43:53 +0000

The batteries Marka Racing have a high level voltage under load, with a low internal resistance.
Marka cells are placed in a very hard case very of black color that protects them from shocks.
Marka battery can be connected using gold connectors of 4mm.
These batteries have passed the necessary certifications for air transport.

Specification
Number of cells: 2 (2S+2P)
Voltage: 7,4V
Capacity: 6000mAh
C-rate: 100C
Plug: 4mm gold plug
Type: Rectangular
Weight: 285g

Code: MRK-LI6000

Marka Racing Li-Po Racing Battery Shorty 4700mAh 100C 7.4V 2S

Davidino — Fri, 23 Jan 2015 16:42:38 +0000

Specification
Number of cells: 2 (2S+2P)
Type: Shorty
Voltage: 7,4V
Capacity: 4700mAh
C-rate: 100C
Plug: 4mm gold plug
Type: Rectangular
Weight: 210g

Code: MRK-LI4700

Marka Supporto Ventola Flottante In Ergal Yokomo BD5/BD7 (25/30/35/40mm)

Davidino — Thu, 13 Nov 2014 15:00:59 +0000

Il supporto ventola flottante Marka Racing è stato progettato, realizzato e distribuito da Marka Racing.
Il supporto per ventola di raffreddamento motore in Ergal 7075 è prodotto tramite il processo di lavorazione dal pieno al CNC (computer numerical control).

Questo supporto è stato progettato per essere utilizzato sulla linea di automodelli radiocomandati scala 1/10 Yokomo BD5/BD7.
Il supporto ventola Marka Racing è stato studiato per essere installato sul foro originale del telaio per il modello BD5 e BD7 2014 mentre per il modello BD7 2015 bisogna procedere facendo un foro sul telaio.
L’operazione di fissaggio al telaio richiede una vite (in modo da non interferire con l’importantissima funzione di “flex” del telaio).
Con questo supporto ventola è possibile alzare ed abbassare la ventola tramite una vite.
Il supporto ventola è compatibile con la maggior parte delle ventole in commercio da: 25, 30, 35 e 40 mm.
Le ventole da 30 o 40 mm potranno essere fissate al supporto con 2 viti, mentre le ventole più piccole da 25 o 35 mm possono essere fissate mediante l’utilizzo di una sola vite (favorendo così un’ulteriore riduzione di peso).
Questo articolo è estremamente leggero (2.3gr) e robusto, rendendolo l’accessorio perfetto per un fissaggio semplice e a prova di urti.

La confezione di vendita comprende un supporto ventola in Ergal 7075 anodizzato nero, una vita per fissarlo al telaio e la vite che permette di alzare e abbassare il braccio dove viene fissata la ventola.
Le viti per il fissaggio della ventola al supporto non sono incluse.

Il supporto ventola Marka Racing è progettato, prodotto e confezionato in Italia.

Codice: MRK-1031-K

Marka Yokomo BD5/BD7 Bicchierini Palo Anteriore in Ergal 7075-T6 Nero (2 PZ)

Davidino — Thu, 13 Nov 2014 14:35:38 +0000

I bicchierini per il Palo Anteriore sono stati progettati, realizzati e distribuiti da Marka Racing.

I bicchierini Marka Racing sono realizzati in Ergal 7075-T6 di altissima qualità e rifiniti con il procedimento di anodizzazione per Ergal.

Sviluppati per essere utilizzati sul palo anteriore e progettati per essere utilizzati con i Blade in plastica (yokomo/Aftermarket non inclusi nella confezione).
Hanno un design esclusivo e sono più leggeri di quelli standard in acciao, un bicchierno pesa 1.7gr.
Adatto per Yokomo BD5/BD7, colore nero.

La confezione è composta da due bicchierini (Pins e Blade non inclusi).

I bicchierini per il Palo Anteriore Marka Racing sono progettati, prodotti e confezionati in Italia.

Codice: MRK-1041-K

Marka Racing Additivo Gomme – MAGIC GRIP – Red

Davidino — Thu, 13 Nov 2014 14:14:55 +0000

Magic Grip Red della Marka Racing è stato sviluppato per l’asfalto per i pneumatici in lattice ed in spugna, inoltre è inodore.
Magic Grip è molto viscoso e aderisce al pneumatico per un lungo periodo.

Pneumatici in lattice
Applicare l’additivo Magic Grip prima di incominciare la gara e lasciarlo agire per 20-30 minuti sui pneumatici.
Prima di iniziare a correre 10 minuti prima pulire i pneumatici con un panno.

Pneumatici in spugna
Applicare l’additivo Magic Grip prima di incominciare la gara e lasciarlo agire per 30-40 minuti sui pneumatici.

Codice: MRK-4001

R1 Wurks 1:10 Lithium Battery (Lipo)

Davidino — Mon, 05 May 2014 10:03:14 +0000

R1 Wurks presenta una serie di batterie Lipo.
La caratteristiche di queste batterie è il peso ridotto e le loro ottime performance.

Le batterie disponibili sono:

- R1 Wurks Battery 7200MAH 90C 2S (Codice PPR1 7200 90)
- R1 Wurks Battery 7000MAH 90C 1S (Codice PPR1 7000 90)
- R1 Wurks Battery 4600 MAH 70C Shorty (Codice PPR1 4600 70)

Codice PPR1 7200 90

Codice PPR1 7000 90

Codice PPR1 4600 70

Produttore: R1 Wurks
Distributore: Minizracing

Team Minizracing!

Team Powers Tyre Additive (Lusty GH)

Davidino — Wed, 02 Apr 2014 08:31:52 +0000

Team Powers presenta un nuovo additivo il Lusty GH.

Questo additivo è ottimo per medio e alto grip, si comporta come il Mighty Grip V2 ma la differenza è che rimane sulla gomma per molto più tempo!

Produttore: Team Powers
Distributore: Minizracing

Team Minizracing!

nVision Factory PRO 2S 8000Mah a Doppio Contatto

Davidino — Wed, 02 Apr 2014 08:23:55 +0000

nVision presenta la nuova batteria 8000Mah a doppio contatto 2S a 7.4V.

Le due uscite sono individuali, entrambe hanno la stessa corrente di uscita!

Produttore: nVision
Rivenditore: Minizracing

Team Minizracing!

Battery nVision Factory PRO 2S da 8000Mah

Davidino — Tue, 25 Mar 2014 23:47:51 +0000

In arrivo le nuove batterie nVision Factory PRO 2S da 8000Mah.

Caratteristiche
n. celle: 2
voltaggio: 7,4V
capacità: 8.000mAh
dimensioni circa.: 138x45x24,5mm
peso: 307g
corrente di scarica breve (10 Sec.): 90C / 720A

Produttore: nVision
Rivenditore: Minizracing

Team Minizracing!

Gogolap – Unità Ricevente RX per K.O. (901SM/902SM)

Davidino — Fri, 07 Mar 2014 10:49:46 +0000

Gogolap ha sviluppato una nuova Micro-ricevente compatibile con i moduli per Mini-Z KO 901SM e 902SM!

Le caratteristiche del prodotto:
1. Supporto di 3CH
2. Buona prestazione della CPU installata sulla micro ricevente ed una buona sensazione di controllo e di precisione
3. Modalità di risposta veloce con supporto [KO]
4. Dimensioni compatte (15×25,5mm)
5. Consigliato per micro automodelli radiocomandati

Per ottenere le migliori prestazioni è consigliato l’utilizzo di un servo digitale.

Produttore: Gogolap
Distributore: Minizracing

Team Minizracing!

PN Racing: RC Printed Circuit Board Assembly

Davidino — Fri, 24 Jan 2014 16:42:54 +0000

PN Racing il noto produttore di parti per Mini-Z, ha sviluppato una nuova elettronia 2.4 Ghz per Mini-Z!

Due tipi di elettroniche PN Racing:

- Codice 500803: PN Racing RC Printed Circuit Board Assembly (03 Setting)
- Codice 500802: PN Racing RC Printed Circuit Board Assembly (02 Setting)

Una per Mini-Z MR-03 ed una per Mini-Z MR-02.

Questa elettronica PN Racing installa 2×2 PN Racing FET che permettono di utilizzare tutti i tipi di motori per Mini-Z con spiraggi superiori a 32T!
E’ compatibile con le radio Spektrum con modulazione DSM2:
- DX3
- DX3R
- DX3C
- DX4C
- DX4S

Produttore: PN Racing
Distributore: Minizracing

Team Minizracing!

PN Racing – Cerchi F0 F1 F2 F3 R0 R1 R2 R3 R14mm per Mini-Z

Davidino — Thu, 09 Jan 2014 15:30:54 +0000

PN Racing leader nel mercato per gli upgrade per Mini-Z ha prodotto una serie di nuovi cerchi per Mini-Z.
I cerchi disponibili saranno con i seguenti Offset:
F0 F1 F2 F3 R0 R1 R2 R3 R14mm

e con colorazioni e stili differenti.

Fonte: PN Racing
Distributore: Minizracing

Team Minizracing!

PN Racing – Pignoni in Alluminio 7075 per MiniZ 64P 8T-14T e 126P 18T-28T

Davidino — Thu, 09 Jan 2014 15:20:22 +0000

PN Racing leader nel mercato per gli upgrade per Mini-Z ha prodotto una serie di Pignoni in alluminio 7075 per Mini-Z.
I pignoni disponibili saranno:
- Passo 64 da 8T a 14T
- Passo 128 da 18T a 28T

Fonte: PN Racing
Distributore: Minizracing

Team Minizracing!